|
|
Products  Refinery & Petrochemical |
 |
 |
|
Screw pumps
Suited for pumping the mixtures of crude oil, gas, water and ultrafine solids occurring in oil production. They can be used both onshore and offshore. Their high tolerance of dry running also allows large quantities of gas in the mixture.
Tank Cleaning Pump
Unique patented system with extremely strong suction, high discharge pressure, solids handling capabilities and is safe to use in hazardous environments. Its powerful and portable pumping system has been developed for the clean up of oil, chemicals and other high viscous and polluting liquids.
Molten Sulphur Pumps
Pumps specifically designed for molten sulphur and other fluids requiring pumping at controlled temperatures. Jacketed Pumps available for clean or slightly contaminated molten sulphur, severe solids contamination, molten sulphur with large solids or rocks
Flame Arresters
In-line Deflagration and Detonation Flame arresters
In-Line Detonation Flame Arrester which has been designed and tested to arrest flame fronts of varying pressures and speeds with both restricted and unrestricted protected side piping as well as long run stable and overdriven detonations.
Deflagration flame front that propagates by the transfer of heat and mass to the unburned gas ahead of the flame front. Flame speeds can range from less than 1 m/s to greater than 350 m/s (supersonic) for very high pressure, turbulent flames. Overpressures can range from a very small fraction to as much as twenty times the initial pressure.
Decoking Control Valves
Directs high pressure water to cutting nozzles during delayed coking process in petroleum refineries, motor-driven, electro-mechanically synchronized, cam-controlled spindle lift, operating pressure ranges to 415-bar, flow capacities to 7500 LPM, drop-tight seat design
Desludging equipment packages
To ensure the smooth operation of tank storage systems. The equipment can be used for tank cleaning or for permanent installation to ensure tank cleaning is no longer needed as regular use ensures sludge is prevented from building up in the first place.
Rotary Vane Compressors
Boosting and Feeding to Gas Turbines
Tube bundle Extractor (Puller) and allied equipment
Equipment designed to pull and push the dirtiest bundle with great ease and in a cheap way. completely self - sufficient, thanks to a hydraulic power unit and a remote control by the use of joysticks. Other related equipment - Internal and External Bundle Cleaning Robot, Straddle Carrier, Spin Nozzle, Rotating Cleaning Heads and Nozzles
Water Treatment Plants
Filtration Systems, Desalination Plants, Reverse Osmosis Dosing Systems, ph, redox, UV & Ozone Treatment
Diverter valves
Fabricated by combinations of several Y-valves and used to change or separate flow streams. Gear pump switching, Polymer filter switching and polymer distribution to different destinations are the main applications.
Drain/Sampling Valves
Extract fluid directly from the pipeline. They can be used under high pressure or even high vacuum conditions. The ram tip is contoured to match the pipe's inside surface when closed so as not to disrupt fluid flow in the pipe. There is no flange between the main pipe and valve body. This feature is effective for polymer application to prevent polymer freezing in the valve.
Also available..
Centrifugal Pumps
Submersible pumps
Triple Screw Pumps
Pneumatic Hoists
Dual-Fuel / Gas Engines
Centrifugal compressors
Reciprocating Compressors,
Air Separation Plants
Incinerators
Flare Stacks
Gas Pilots
Knockout Drums
Static Mixers
Oil-Water separators
|
|
Ports & Shipyards
Pollution Control
